Buy Low Price From Here Now
Alvin CraftMaster drafting table has sturdy 11/2'' tubular steel construction with a powdercoated finish. The laminate tabletop has rounded corners.Drafting table features a onehand tiltangle mechanism that adjusts tabletop from 0 to 30 degrees. Two threedrawer storage units each measure 7''Wx 10''D x 7''H. Metal pencil ledge and plastic instrument tray are included.Footrest crossbar has a rubber tread and 21'' of leg room. Height adjusts 28'' to 32'' in the horizontal position using casters or 26'' to 30'' using floor glides (both sets included). Ships ready to assemble.
Readmore
Technical Details
- Laminate top with rounded corners- Two sets of three-drawer storage units
- Tabletop adjusts from 0 to 30 degrees
- Height with casters adjusts 28" to 32"
- Height adjusts 26" to 30" with floor glides
See more technical details
By Black Belt (Richmond VA)
Parts missing for this Christmas gift. Emailed the company (Alvin) and they responded that I should contact the dealer from whom I purchased the item...so I'm in the process of contacting Amazon. I'm very disappointed.
The table top is MDF and is attached to the frame by wood screws; this is going to loosen over time.
By Jason L. Buchta (texas)
I am a drafting and design student and I found this to be a great buy.I put it together in about an hour and it came with all the tools I needed. I used a little lock tight and wood glue from home depot to make for stronger joints and it worked out well.I would say that you should buy it, it's a great table.
By Wayne Greene (OK, USA)
First, the instructions and parts combination need a little improvement. But if you take your time, check off all the parts, and look carefully at the parts and the instructions, it will come together. You do have to be capable of critical thinking and have a logical, intelligent approach.
As for a couple of reviewers crying about no stability, I find that not to be the case. Granted you need to be smart and use proper tools to assemble it; power drill/driver, screw driver, pliers, etc. Using basic skills, tighten everything, including frame to drawing board. Then, be sure all bolts are properly snugged and you won't have any problems with "instability." (If you only use the tools that come with the table, you'll have an unstable table!).
The drawers are rather cheap plastic. While they are functional, they are still just cheap plastic drewers..
For the price, this is a fine table and sufficiently sturdy to support drafting, drawing, painting or crafts activities with no problems. I've done all but the drafting and I love the table. And as I've already stated, no problem with stability, unwanted movement or the like.
I recommend this table with no reservations beyond what is stated above.
By Jeffrey A. Gold (plainview, NY USA)
I found the table to be made of base metal like steel as two bolts stripped the threading. The steel is soft and cheap. Instructions are written poorly and the diagrams are useless. I called the company and explained they are only middlemen and they do not make the item. That they would pass along my comments to the buyers. Buy something else this is not going to make you happy!
By Vatsug (Boston, MA)
If you expect this table will be sturdy as the picture appears (as I did), think again. The junction where you adjust the table height is nowhere near tight, and it allows the table top to rock back and forth. Each time you put your weight on it to write, it shifts at that connection point. Very cheap and unbelievably annoying. You get what you pay for - but returning this thing is a nightmare once it is put together. Before taking it out of the box, make a diagram of how it is packed. If you are like me and expected it to be, at the very least, somewhat stable, I would avoid this type of table and look for something more refined to avoid wasting time and energy.
Images Product
Buy Alvin CraftMaster Art Hobby Table - Cherry Now
0 ความคิดเห็น:
แสดงความคิดเห็น